BXGRID Geogrids

Biaxial & Uniaxial Geogrids

Geogrid Made in the USA
For more than 20 years, punched and drawn Geogrids have set the standard by which all Geogrids were measured. L & M is proud to carry on this tradition of cost effective performance and proven reliability that the industry has come to trust.
BXGRID Type 1 BXGRID 11 Biaxial Geogrid and Type 2 BXGRID 12 Biaxial Geogrid
BXGRID 11 & BXGRID 12 Geogrids are an affordable alternative and functionally equivalent to the SYNTEC SBX11 & SBX12 and Tensar BX1100 & BX1200.
L & M Supply BXGRID Biaxial Geogrids are punched and drawn from high grade polypropylene for high flexural rigidity and high tensile strength at ribs and junctions. Used in road reinforcement, BXGRID Geogrids increase the life of the surface and reduce maintenance costs. We maintain a huge inventory of both Type 1 BXGRID 11 Biaxial Geogrid and Type 2 BXGRID 12 Biaxial Geogrid at all of our locations across the USA! 
Call 800-948-7870 to learn more or to discuss you project needs with one of our product specialist.
Biaxial Geogrid Type 1 and Type 2
Type 1 BXGRID 11 Biaxial Geogrid and Type 2 BXGRID 12 Biaxial Geogrid
Uniaxial Geogrids are manufactured using select grades of high-density polyethylene (HDPE) resins, that resist elongation (creep) when subjected to high loads for long periods of time as required for steepened slopes and MSE walls. Call for more information.


Soil Stabilization

When faced with soft soils, L & M BXGRID geogrids offer superior solutions to deep undercutting or chemical stabilization to greatly reduce the overall cost of construction.
Compared to deep undercuts, BXGRID Geogrids:
1. Reduce fill or aggregate thickness
2. Reduced hauling, equipment hours & emissions
3. Reduce construction time 
Compared to chemicals stabilization, BXGRID Geogrids:
1. Require no specialized equipment or crews
2. Are not sensitive to weather conditions or soil chemistry
3. Require no cure time and provides permanent stabilization

Base Reinforcement:

When constructing roadways over a relatively firm sub-grade BXGRID biaxial geogrids provide a predictable and reliable level of performance to enhance pavement life; and or reduce required aggregate and or pavement thickness. The high tensile strength and junction efficiency of BXGRID biaxial geogrids confine and restrain aggregate from lateral movement. This distributes the applied load over the sub-grade to a larger area resulting in a thinner pavement cross section, a longer service life or a combination of both.

a. Reduced aggregate thickness
b. Reduced pavement thickness
c. Reduced undercut

a. Broader distribution of applied load to subgrade
b. Minimize rutting
Some Common Applications:
  • Paved highways and secondary roads
  • Parking areas for commercial and industrial facilities
  • Airport runways and taxiways
  • Truck freight distribution centers and terminals
  • Heavily loaded equipment yards at port, rail, intermodal, and industrial facilities
  • Haul road
For pricing & more information, call Toll Free (800) 948-7870 
Share by: